We seek to understand and document all radio transmissions, legal and otherwise, as part of the radio listening hobby. We do not encourage any radio operations contrary to regulations. Always consult with the appropriate authorities if you have questions concerning what is permissible in your locale.

« previous next »
Pages: [1]

Author Topic: Programmable SDR hardware?  (Read 1144 times)

Online Ray Lalleu

  • Marconi Class DXer
  • ********
  • Posts: 39300
    • Western part of France
    • View Profile
Programmable SDR hardware?
« on: July 17, 2020, 1506 UTC »
Can the SDR hardware part (of commercially available SDR units)
be programmed under control of the PC ?
Ideas :
- synchronisation of the ADC rate on a carrier
- optimisation of the FPGA processing to get the best S/N on a particular band
Logged
D/E/F/G/It/Sp : Dutch/English/French/German/Italian/Spanish
+/- : about 0.02 offset, ++/-- 0.03/0.04 offset
Balanced wire antennas, wire lines and ATU
*** Semaines des ondes courtes, pages médias et technique, en français, demandez  les par message ici dans HFU ***

Offline ChrisSmolinski

  • Administrator
  • Marconi Class DXer
  • *****
  • Posts: 31816
    • Westminster, MD USA
    • View Profile
    • Black Cat Systems
Re: Programmable SDR hardware?
« Reply #1 on: July 17, 2020, 1517 UTC »
Most SDRs allow you to flash the firmware, often including the FPGA.  With something like the KiwiSDR which is open source, you could probably make your own changes if you wanted to.
Logged
Chris Smolinski
Westminster, MD
eQSLs appreciated! csmolinski@blackcatsystems.com
netSDR / AFE822x / AirSpy HF+ / KiwiSDR / 900 ft Horz skyloop / 500 ft NE beverage / 250 ft V Beam / 58 ft T2FD / 120 ft T2FD / 400 ft south beverage / 43m, 20m, 10m  dipoles / Crossed Parallel Loop / Discone in a tree
Pages: [1]
« previous next »
 

HFUnderground T-Shirt
HFUnderground House Flag
by MitchellTimeDesigns