KiwiSDR

2018-12-31T18:11:55Z

Pcldltr: /* KiwiSDRs run by HFU Members */

= Overview =
Placeholder page

= KiwiSDRs run by HFU Members =
* Wake Forest, NC USA http://chimay.homelinux.org:8073
* Westminster, MD USA http://sdr.hfunderpants.com:8073
* CT/MA Border, Northeast USA http://sigmasdr.ddns.net:8073
* Mojave Desert, CA USA http://tokenradio.proxy.kiwisdr.com:8073/
* Westerville, OH USA http://ohioswl.com:8073
* Old Hickory, TN USA http://midtn.dynu.net:8073
* Warwick, RI USA http://joeflips.hopto.org:8073/
* Seattle, WA USA http://strangebeacons.proxy.kiwisdr.com:8073/

= KiwiSDRs Tips =

== Set Static IP Address ==

You may want to set the IP address of your KiwiSDR statically, rather than a dynamic DCHP address obtained from your router. Go to the Network tab on the KiwiSDR admin page to do this.

== GPS Antenna ==
The antenna that comes with the KiwiSDR works, but can be marginal, especially when used indoors. I bought [https://www.amazon.com/gp/product/B00LXRQY9A/ref=oh_aui_detailpage_o00_s01?tag=blackcatsyste-20&linkCode=w00 this antenna ] from Amazon, and it seems to work better. I also found that it helps tremendously to have the antenna sitting on a metal ground plane. A simple small aluminum baking sheet works great. I carefully adjusted the location of the antenna on the sheet, as well as the location of both (they are sitting on a shelf) for maximum signal(s) from the GPS satellites.

I just replace the pan with a sheet of aluminum foil, and that seems to work even better.

== Enclosures ==

An all aluminum case is available from [https://www.seeedstudio.com/KiwiSDR-Enclosure-p-3012.html Seeed Studios] that includes a small cooling fan.

== DX Labels ==

DX Labels can be added to help users quickly identify and choose frequencies, automatically set passband, mode, and extension, etc. Users can click on a label and the receiver will be set to the parameters you choose. Only administrators can add or make changes to labels.

To add, edit, or modify labels:

Press and hold the shift key and then click on the label bar to add a new label. To modify or delete an existing label, press and hold the shift key and click on the label you wish to change.

* The Freq and Mode fields are taken from the receiver's settings when you add a new label. These can be edited if desired.

* The Ident field is the text that is shown on the DX label bar. HTML tags (e.g. <nowiki><br></nowiki> to make two lines of text) can be used to make labels more readable if desired.

* The Notes field allows for additional information to be displayed by hovering the mouse over the label (such as day or time station is active).

* The Passband field can be set by specifying it in Hz.

* The Extension field can be set my specifying an available extension

HFUnderground - User contributions [en]

KiwiSDR